Dulux Trade Stain Block Plus
A water based 2-in -1 problem solving primer, that seals and binds surfaces as well as blocks common stains.
Key information
- Formulation
- Water-based
- Pack sizes
- 1L, 2.5L
Application information
- Coverage
- Up to 14m² per litre
- Touch dry
- Dependent upon temperature and humidity
- Recoatable
- 6-8 hours. Note - this product can usually be recoated within 6-8 hours but on very porous surfaces a longer drying time may be required.
- Thinning
- This product does not require thinning.
- Application
Key benefits
- Seals powdery, dry and friable surfaces, including limewash and distemper
- Blocks stains caused by water, ink, smoke damage, grease etc.
- For plaster surfaces.
System information
To get the best results make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
After suitable preparation apply 1 coat of Stain Block Plus to all bare or stained surfaces and allow to dry. Two coats will be necessary for difficult stains.
After use, remove as much paint as possible from brushes before cleaning with clean water
